User’s Manual of IMG-110T
-5-
1. INTRODUCTION
Thank you for purchasing PLANET Industrial 1-port RS422/485 Modbus Gateway, IMG-110T. The term “Industrial Modbus
Gateway” mentioned in this user’s manual refers to the IMG-110T.
1.1 Package Contents
Open the box of the Industrial Modbus Gateway and carefully unpack it. The box should contain the following items:
The Industrial Modbus Gateway x 1
Quick Installation Guide x 1
User’s Manual CD x 1
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them again to repack the product in case there is a need to return it to us for repair.
1.2 How to Use This Manual
This Industrial Modbus Gateway User Manual is structured as follows:
Section 2, HARDWARE INSTALLATION
The section explains the functions of the Industrial Modbus Gateway and how to physically install the Industrial Modbus
Gateway.
Section 3, INDUSTRIAL MODBUS GATEWAY MANAGEMENT
The section contains the information about the software function of the Industrial Modbus Gateway, and also explains
the PLANET Modbus Gateway utility and how to use the Industrial Modbus Gateway.
Section 4, WEB MANAGEMENT
The section explains how to manage the Industrial Modbus Gateway by Web interface.
Section 5, COMMAND LINE INTERFACE
The section describes how to use the Command Line interface (CLI).
Section 6, COMMAND LINE MODE
The section explains how to manage the Industrial Modbus Gateway by Command Line interface.
Appendix A
The section contains cable information of the Industrial Modbus Gateway.
To Next Page
Loading...
Need help?
General
