Planet IMG-110T User Manual

User’s Manual of IMG-110T
-18-
3.3.2 Login the Industrial Modbus Gateway Web Interface
The following shows how to start up the Web Management of the Industrial Modbus Gateway. Note the Industrial Modbus
Gateway is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet
address.
For example, the default IP address of the Industrial Modbus Gateway is 192.168.0.100, then the manager PC should be set to
192.168.0.x (where x is a number between 1 and 254, except 100) and the default subnet mask is 255.255.255.0.
Logging in to the Industrail Modbus Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter IP address http://192.168.0.100 to access the Web interface.
2. When the following dialog box appears, please enter the default user name and password “admin”. The login screen in
Figure 3-4 appears.
Default Username: admin
Default Password: admin
Figure 3-4: Web Login Screen
1. After entering the username and password, the main screen appears as Figure 3-5 shows.

Planet IMG-110T Specifications

General

Brand	Planet
Model	IMG-110T
Category	Gateway
Language	English