Planet IMG-110T - IP Filtering

User’s Manual of IMG-110T
-60-
4.7.2 IP Filtering
This function allows setting up the IP Filtering function of Industrial Modbus Gateway. Press the “Submit” button to apply the
setting as the screen in Figure 4-19 appears.
Figure 4-19: Access Control -- IP Filtering Screen
The page includes the following configurable data:
IP Filtering
This function provides “Disable” or “Enable” the IP Filtering function.
Filtering Rule
This function provides “Allowed” or “Forbidden” options for the filtering rule.
Number
Indicate the number from 1 to 16 for filtering rules.
State
This function provides “Disable” or “Enable” for per filtering rule.
Access Permission
This function provides “Allowed” or “Forbidden” for per filtering rule.
IP Address
This function allows inputting the IP address.
Subnet Mask
This function allows inputting the Subnet Mask value.
Button
: Click to apply changes.