User’s Manual of IMG-110T
-40-
3.5.4.4 Reset Factory Settings
This function is to reset PLANET Modbus Gateway to default as the procedure is shown below:
Step 1: Activate PLANET Modbus Gateway Utility.
Step 2: Search the Industrial Modbus Gateway that needs to be reset to default and choose the device.
Step 3: Right-click to choose the “Restore Factory Settings”.
Figure 3-37: Planet Modbus Gateway Utility Device Function -- Restore Factory Settings Screen
Step 4: Click “Yes” when the “Are you sure to restore factory settings” pop window appears.
Figure 3-38: Planet Modbus Gateway Utility Device Function -- Restore Factory Settings Screen
Step 5: Press “OK” to complete the factory default procedure.
To Next Page
Loading...
