Planet WAP-500N - Page 49

• Cancel
Click
settings
In the CB/WDS STA/CR/Repeater
mode,
the wireless security similar to the
root AP’s security settings
Figure 4-26
Wireless Network
The page includes the following settings
Object
Description
• Wireless Mode
Wireless mode supports
• SSID
Specify the SSID if known. This field is
select an Access
• Site Survey
Scans nearby locations for Access
Access
• Prefer BSSID
Ent
Survey, this
• Wireless Security
Refer to section
• Accept
Click
• Cancel
Click
settings
User Manual of
WAP
-48-
Click
Cancel to
cancel the unsaved changes and revert to the previous
settings
.
mode,
select Security Mode on the “
Wireless Network
root AP’s security settings
.
Wireless Network
–
CB/WDS STA/CR/Repeater Mode
The page includes the following settings
:
Description
Wireless mode supports
802.11a/n
mixed modes.
Specify the SSID if known. This field is
completed automatically if you
select an Access
Point in the Site Survey.
Scans nearby locations for Access
Points. You can select a discovered
Access
Point to establish a connection.
Ent
er the MAC address if known. If
you select an Access Point in the Site
Survey, this
field is completed automatically.
Refer to section
5.5.3 Security Setting.
Click
Accept to apply the setting.
Click
Cancel to
cancel the unsaved changes and revert to the previous
settings
.
WAP
-500N/WBS-500N
cancel the unsaved changes and revert to the previous
Wireless Network
” page to configure
CB/WDS STA/CR/Repeater Mode
mixed modes.
completed automatically if you
Points. You can select a discovered
you select an Access Point in the Site
cancel the unsaved changes and revert to the previous