Planmeca Proline XC - 7.1.1 Selecting patient size; 7.1.2 Selecting kilovolt and milliampere values

GRAPHIC USER INTERFACE
10 Planmeca Proline XC Panoramic X-ray
User's manual
The Select program type display shown below
appears. Select program type Pan.
NOTE The exposure program Ceph will appear on the
list in case the X-ray unit is equipped with
Cephalostat.
When you have selected the panoramic exposure
program the main display will be shown again.
7.1.1 Selecting patient size
To change the patient size from adult to child, touch
the Patient size field on the main display. To change
the setting back to adult, touch the Patient size field
again.
If the patient is a child or a very small adult select the
child setting, otherwise select Adult. When you select
the child setting the width and height of the exposed
area will be slightly reduced.
7.1.2 Selecting kilovolt and milliampere values
Touch the kV/mA field on the main display.