OPERATION MANUAL TMS4000
TMS4000 Operation Manual 2018-08-03.docx August 3, 2018
PAGE 18
CUSTOMIZING INDIVIDUAL METERS
The below examples illustrate how each individual meter can be configured. The top example is
for Tank Channel selection and the bottom example is for Unit selection.
Touch the Tank ID in the back box at the top left corner of the meter to bring up a selection of available
Tank Channels that can be selected for the meter. Note that a Tank Channel represents where the
probe is physically wired and may differ from the user assigned Tank ID
Touch the unit displayed on the far right of the meter (in this case, GAL) to display the drop down
menu of choices. Touch the radio button for the desired selection to select that choice.
To Next Page
Loading...