OPERATION MANUAL TMS4000
TMS4000 Operation Manual 2018-08-03.docx August 3, 2018
PAGE 9
1.4 LEAK/POINT LEVEL SENSOR STATUS
The sensor’s alarm or activity status is represented graphically as illustrated below. The colors
represent the following:
• Green: Normal or inactive sensor
• Red: Sensor alarm or activity. May be a general, product, or water alarm.
• Yellow: Sensor fault error. Either open or short-circuited wiring or a faulty sensor.
All view: shows the status for all enabled sensors
Alarms view: shows only the sensors in an alarm or error state.
To Next Page
Loading...