OPERATION MANUAL TMS4000
TMS4000 Operation Manual 2018-08-03.docx August 3, 2018
PAGE 38
2.9.1 LEAK TEST SCHEDULING - MANUAL
The Manual Leak Test Mode is ideal for applications where the user prefers to manually start the test,
usually due to a site having a high throughput. The user would manually shutdown the tank before
beginning the test. The test length must be set to comply with local regulations covering the size of
tank being tested. Check the box marked “Start Leak Test Schedule On Exit” and touch the Close
button to start the test immediately.
To Next Page
Loading...