OPERATION MANUAL TMS4000
TMS4000 Operation Manual 2018-08-03.docx August 3, 2018
PAGE 20
SECTION 2 – SYSTEM CONFIGURATION
2.1 SETUP MENU
The Setup Menu contains options for configuring the TMS and other select administrative
functions. A brief description of each section is provided below.
• Config: The configuration of the TMS can be reviewed and/or modified in this section. This
includes details for tank geometry, sensor configuration, and Communications and I/O
Card configuration. Details are found in the next section.
• Leak Test: This section configures the details for the In-Tank Leak Test including the Test
Length and scheduling of the test.
• The System Log contains a list of administrative events like a configuration change or
firmware upgrade. Select system problems may also be documented here. This log will
be described in Section 3.
• Security: sets the security for accessing select TMS features. Once enabled, a 4-digit PIN
number will be needed to access select features.
• Firmware: provides the ability to upgrade the firmware or view what the current firmware
level is.
• Localization: the system language and units of measure are configured here.
To Next Page
Loading...