7.28
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
10.Torque the center and rear propshaft support bearing
fasteners to specification.
IMPORTANT
Ensure the coolant line clip is reinstalled and torqued
down with the support bearing.
TORQUE
Support Bearing Fasteners:
33 lb-ft (45 Nm)
11. Install the skid plates on the vehicle. Refer to “Skid
Plate Replacement”page 10.73 procedure.
FINAL DRIVE
To Next Page
Loading...
