8
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
8.29
28.Remove retaining ring on BOC post assembly with
valve.
29.Note order of valve components for assembly.
30.Remove BOC post.
31.Remove rebound valve stack. Note order of valve
stack for assembly
NOTICE
If you are not changing valve shims you can zip tie the
shims together, this will keep valve shim stack in their
assembled order.
32.Remove the piston. Note the orientation of the piston
as it comes off the shock shaft - compression side
down.
STEERING / SUSPENSION
To Next Page
Loading...
