FINAL DRIVE
7.20
REAR HUB/BEARING
CARRIER REMOV
AL
1. Lock the parking brake. Remove rear hub cap.
2. Remove cotter pin.
3. Loosen the hub retaining nut.
4. Loosen the wheel nuts.
5. Safely support the rear of the ATV.
CAUTION:
Serious injury could occur if machine tips or falls.
6. Remove hub nut, domed washer and flat washer.
7. Remove wheel nuts and wheel.
8. Remove hub.
9. Remove upper control arm bolt as shown.
Remove Upper
Control Arm Bolt
Enfocus Software - Customer Support
To Next Page
Loading...
