TRANSMISSION
8.8
TRANSMISSION
DISASSEMBL
Y
1. Remove gear indicator switches BEFORE
disassembly.
Remove switches
2. Drain and properly dispose of transmission oil.
Drain
3. Remove all cover bolts. Tap cover with soft face
hammer to remove. Note 2 bolts in center of
cover.
Remove all bolts
CAUTION:
Do not pry on case half sealing surfaces.
4. Mark chain rotation direction for assembly. Note
location of chain tensioner cam. If fully extended,
chain is worn beyond service limit. Replace chain
and chain tensioner shoe.
Enfocus Software - Customer Support
To Next Page
Loading...
