FINAL DRIVE
7.27
7. Tighten boot clamp using boot clamp pliers.
8. Fill boot with grease supplied with boot service kit
and spread remaining grease evenly inside CV
joint.
9. Be sure to use only the Constant Velocity Joint
grease supplied with boot service kit. IF CV
JOINT WAS CLEANED, add the recommended
amount of grease to the joint
in addition
to the
grease pack supplied with boot kit.
NOTE: CV Joint Grease Capacity:
Joint Capacity
50 Grams
Boot Capacity
30 Grams
Joint Capacity
50 Grams
Boot Capacity
50 Grams
INBOARD
100g Total
OUTBOARD
80g Total
CV Joint Grease - 30g PN 1350046
50g PN 1350047
Outboard joint
- 30g if boot is replaced only. Another
50g (80 total) if joint is cleaned.
Inboard joint
- 50g if boot is replaced only. Another
50g (100 total) if joint is cleaned.
Enfocus Software - Customer Support
To Next Page
Loading...
