Maintenance
2.4
PWC Specific Maintenance Products
As with all watercraft, proper lubrication and corrosion protection are necessary to maintain performance and en-
sure years of trouble free service. Use the recommended lubricant for each component as indicated in the chart
below.
Product Application
Polaris Premium
All Season
Grease
-Driveshaft coupler splines
-Driveshaft impeller splines
--Coupler O ring
-Steering post bushings
-Driveshaft bearing housing
-Steering cable ends
-Pump to hull O-ring
-Carburetor shafts, springs
-Seat latch and hooks
-Throttle, choke, and steering inner cables
-Ends of throttle and choke cable
-Oil pump control cable
-reverse cable (if applicable)
Nyogelt Grease -All electrical connections and connectors
-Battery cable bolts
-Engine ground connection at mount plate, reed cage, etc.
Marine Grade
Silicone Sealant
(PN 8560054)
-Pump inlet scoop
-Pump mating surfaces
-Ride plate
-Area where cables pass through hull,
-All underwater areas,
T -9 Metal
protectant
-All external metal parts
(For internal engine protection use Polaris fogging oil)
To Next Page
Loading...
Need help?
General
