8.26
Steering and Suspension Systems
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
©2011 Polaris Sales Inc.
Widetrak Front / Rear Torque Arms
Assembly Notes
• Never re-use Nylock nuts fasteners with locking
agent. Always replace with new parts.
• All pivots must rotate freely after tightening
fasteners.
• Apply Polaris Premium All Season Grease to all
grease zerks as outlined in the maintenance table.
• Thoroughly grease all inner shafts prior to
installing into torque arm assemblies.
TORSION SPRING
INNER SHAFT
REAR TORQUE ARM
REAR SCISSOR
INNER SHAFT
TENSION
ADJUSTER
INNER SHAFT
FRONT TORQUE ARM
INNER SHAFT
SPACER
SPACER
INNER SHAFT
SHOCK ASSEMBLY
A
B
B
B
A
B
A
A = 40 Ft.Lbs.
B = 25 Ft.Lbs.
C = 45 Ft.Lbs.
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners when mounting
the suspension to the tunnel.
To Next Page
Loading...
Need help?
General
