ENGLISH
19
Using Your LCD TV
How To Operate Your TV for the First Time
1 Once all of your connections have been made and the AC Power Switch has been turned on, press
the button on the side of the TV or on the remote control to turn on the TV. The indicator light will
turn blue.
2 When you turn on your TV for the fi rst time, the Auto Install menu will appear automatically on the
screen. Make sure your TV is connected to an aerial (antenna) cable. The Auto Install process should
take about 10 minutes to complete.
1
Press the ▲ or▼ button to highlight Country* and press OK.
2
Press the ◄ or ►button to select your Country and press OK.
3
Press the ▲ or▼ button to highlight Language** and press OK.
4
Press the ◄ or ►button to select your preferred Language and press OK.
5
Press the ▲ or▼ button to highlight Start Channel Scan and press OK to
start Channel Scan.
When the Channel Scan Progress reaches 100%, the Service Scan is
complete. The TV should now return to normal operation.
*Available Countries Include:
Austria, Belgium, Czech, Denmark, Finland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and more.
*Available Languages Include:
English, French, German, Spanish, Italian, Finnish, Swedish, Dutch, Danish and Norwegian.
3 Select an input source using the table below.
Remote Control Button Input Source
TV Switch to ATV (Analogue) and DTV
(digital) modes
PC/HD Switch to VGA/ HDMI 1/ HDMI 2 modes
VIDEO Switch to Composite/ S-Video/
Component modes
SCART Switch to SCART1/ SCART 2/ SCART 2S
To Next Page
Loading...
Need help?
General