ENGLISH
21
Using Your LCD TV
How to Customise the Picture Settings
1 With the power ON, in any mode, press the SOURCE button to choose desired source.
2 Press MENU.
3 Use the ◄► buttons to select VIDEO and press ▼ button.
4 Use the ▲▼ buttons to highlight your desired VIDEO option. Press OK to enter the Sub-Menu.
5 Use the ◄► buttons to make adjustments in the adjustment bar and press OK.
6 Press MENU to return to the Main Menu, or press EXIT to exit the Menu.
MAIN MENU: ADJUSTMENT BAR:
The VIDEO MENU includes the following video setting options:
BACKLIGHT
Adjust the backlight level of the screen.
CONTRAST
Control the difference between the brightest and darkest regions of the picture.
BRIGHTNESS
Control the overall brightness of the picture.
COLOUR
Control the colour intensity of the picture.
SHARPNESS
Increase this setting to sharpen the edges in the picture.
Decrease this setting to soften the edges in the picture.
NOISE REDUCTION
Decrease picture “noise” or imperfections due to a weak signal. Switch to Auto/ High/
Middle/ Low/ Off. We recommend not using “High” Noise Reduction on fast-moving im-
ages.
NOTE:
*The Scroll Bar on the side of the OSD indicates if there are settings further up or
down the screen.
**VGA mode is best viewed with lower brightness and contrast settings.
To Next Page
Loading...
Need help?
General