40
Using Your LCD TV
How to Use the TELETEXT Functions
TELETEXT is an information service broadcast offered by some TV stations (depending on the country) which gives up-
to-the-minute information, news, weather, television programs, share prices, subtitles, and so on.
This TV has 100 Teletext page number memories.
TELETEXT Operation:
1 With the power turned on, in any mode, select a TV station on which TELETEXT is transmitted.
2 Press the TELETEXT button on the remote control to display the TELETEXT screen.
Display:
Two page numbers, TV station name, date, and time are displayed on the screen’s headline. The fi rst page
number indicates your selection and the second page number shows the current page being displayed.
3 Press TELETEXT to toggle between the following text modes: TEXT/ MIX/ PAT/ OFF.
TEXT Mode MIX Mode PAT Mode (Picture & Text)
TELETEXT Page Selection:
1 Enter the required TELETEXT page as a three-digit number.
Display:
The selected page number is displayed at the top left corner of the screen. The TELETEXT page counter
searches until the selected page number is located. The desired page is displayed on the screen.
2 Use CH▲▼ buttons or buttons to select the preceding or following page.
3 Use RED/ GREEN/ YELLOW/ BLUE buttons on the remote control to perform Fastext movement.
Display:
Four subject-heading pages can be selected quickly by pressing the corresponding coloured buttons Red/ Green/
Yellow/ Blue on the remote control.
To Next Page
Loading...
Need help?
General