• Setting Self-timer
Your camera is designed with a self timer
function which will allow you to take pictures
with a countdown of 2 or 10 seconds.
scene
menu
1. Press the button to set the camera to
Still Image mode.
2. Press the
menu
button to enter menu bar.
3. Press the or button to choose (Drive
Mode).
Drive Mode
Off
2 sec
10 sec
Double
Burst
4. Press the or buttons to scroll up and
down through menu options.
5. Press the button.
Display Option Description
Off Single shot Record a single image
2
2-SEC Take a picture after a count down of 2 seconds
10
10-SEC Take a picture after a count down of 10 seconds
Double
Take two pictures in a shot after a count down of 10
seconds
Burst
Press and hold the shutter button to take pictures in quick
succession
6. Capture procedures are the same as for taking a picture in the normal
capture mode. See page 33.
NOTE:
• This feature is only available in Still Image mode.
• Place the camera on a at surface or use a tripod when using the self-timer
function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
