1 - 6
Film Loading and Picture Removal Doors provide access to the film pack compartment and the picture
chamber, respectively (Figure 1-4). Loading a film pack into the Camera and closing the Film Door brings
the pack to the image plane and automatically transports the darkslide into the storage chamber, unless this
chamber is full. If it is, a warning LED will light and an audio signal will sound, and darkslide will occur
after the picture storage chamber has been emptied.
Up to ten finished (processed) pictures may be removed and also re-inserted, if desired, in the picture
chamber, by opening the Picture Removal Door.
Figure 1-4. Access to the Film Pack and Picture Storage Areas
To Next Page
Loading...
Need help?
General
