POLMAR RX-1300 - Recalling Dual Watch Memories; Accessing Stored Dual Watch Pairs

61
To recall a pair of Dual Watch frequencies from the Dual Watch Memories:
1. Press the E/VFO key to select VFO Mode.
2. Set the squelch level to a point where the receiver is just quiet.
3. Press Func MR. The receiver will enter the Memory Read mode.
4. Press the BANK key repeatedly to step through the memory banks until Du is selected
or press SKIP to directly access Du bank.
5. Select the required channel using the control knob.
6. BrieypresstheSCAN/SRC key. Dual Watch will begin with the receiver monitoring the
channels in the selected Dual Watch memory.