Need help?Do you have a question about the POLMAR RX-1300 and is the answer not in the manual?
Essential safety and operational warnings for receiver use.
List of items provided with the scanner receiver.
Instructions for fitting and removing the battery pack.
Procedures for connecting the antenna and lanyard.
Detailed steps for charging, including LED indicators and alternative methods.
Diagram and labels for all buttons, knobs, and the display.
Detailed descriptions of each button and knob's operation.
Keys used for direct frequency entry and basic commands.
How to access secondary functions using the FUNC key.
Using FUNC for memory storage, reading, skipping, and scan control.
Controlling Tone, Delay, Attenuator, and Mode selection via FUNC.
Explanation of status icons and labeled display elements.
Basic controls for unit power, keypad lock, volume, and squelch.
Navigating settings and selecting modes with key functions.
Adjusting frequency and navigating menus with the control knob.
Inputting frequencies directly using the keypad.
Changing frequency increments using FUNC and keys.
Changing frequency increments using FUNC and the control knob.
Manual and automatic selection of AM, FM, WFM, etc.
Choosing step values via the menu and available options.
Table detailing frequency ranges, default modes, and steps.
Procedure for locating active frequencies within a specific band.
Scanning the entire receiver frequency range for signals.
Defining custom upper and lower frequency limits for searching.
Inputting the first and second frequency limits for the search.
Understanding search direction control and reviewing usage examples.
Using a direct frequency as the priority channel during scans.
Using a memory channel as the priority during scans.
Steps to set up simultaneous monitoring of two frequencies.
Behavior of Dual Watch during signal reception and timer settings.
Overview of different memory types, capacities, and labeling.
Step-by-step guide to saving frequencies into manual memory.
How to retrieve stored manual frequencies from memory.
How the receiver saves frequencies during searches into automatic banks.
Accessing frequencies that were stored automatically.
Procedure for storing upper and lower frequency limits for searches.
Procedure for storing pairs of frequencies for dual watch monitoring.
How to retrieve saved dual watch frequency pairs for monitoring.
Scanning memorized channels within selected banks.
Scanning all available memorized channels.
Using a direct frequency as the priority channel during scans.
Using a memory channel as the priority during scans.
How to access and move through the receiver's settings menus.
Descriptions of Busy Timer, Tone, Priority Time, Step, Beep, and Delay settings.
Erasing individual channels or entire memory banks.
Duplicating or relocating frequencies between channels or banks.
Duplicating a frequency to another channel.
Relocating a frequency to a different channel.
Deleting all stored information from the receiver.
Deleting all frequencies within a selected bank.
Deleting a specific frequency from memory.
Step-by-step guide for transferring memory data between units.
Frequency coverage, memory channels, resolution, temperature, power requirements.
Current drain, antenna connector, dimensions, and weight.
Details on the receiver's architecture and intermediate frequencies.
Performance data for FM, WFM, and AM modes.
AF output power and external speaker interface details.
Information on responsible disposal of electronic waste according to regulations.
Legal terms and conditions of the product warranty.
Fields for recording purchase and user details for warranty purposes.
To Next Page
General