POLMAR RX-1300 - Channel Data Transfer Operations; Copying a Single Channel; Moving a Single Channel

66
Channel Copy
To copy one channel to another:
1. Select the channel that you would like to copy from.
2. Press Menu, then use the Control Knob or the volume ▲ ▼
keys to select ‘CH Copy’
3. Press E/VFO to accept. The receiver will then automati-
cally select the next empty channel in the same Bank.
4. If you don’t wish to use the empty channel selected by
the receiver, use the Control Knob, number keys or the
BANK/BAND key to select the preferred channel and
Bank.
5. Press E/VFO again to copy the original channel to the new
channel. The original channel will remain unchanged.
Channel Move
To Move one channel to another:
1. Select the channel that you would like to move from.
2. Press Menu, then use the Control Knob or the volume ▲ ▼
keys to select ‘CH Move’
3. Press E/VFO to accept. The receiver will then automati-
cally select the next empty channel in the same Bank.
4. If you don’t wish to use the empty channel selected by
the receiver, use the Control Knob, number keys or the
BANK/BAND key to select the preferred channel and
Bank.
5. Press E/VFO again to move the frequency to the new
channel. The original channel will now be empty.