Connect monitors to the Poly Studio G62 system
Connect two monitors to the system to display far-side video and content.
1. Connect one end of the HDMI cable to HDMI port 1 on the primary monitor.
2. Connect the other end of the HDMI cable to the HDMI 1 port on the Poly Studio G62 system.
3. Connect a second monitor to the HDMI 2 port on the Poly Studio G62 system.
Pair a Poly TC10 or Poly TC8 to your Poly Studio G62 system
You can pair one or more Poly TC10 or Poly TC8 to your Poly Studio G62 system.
1. Connect the Poly TC10 or Poly TC8 to a PoE Ethernet connection connected to your network.
You can't connect the Poly TC10 or Poly TC8 to an Ethernet switch connected to the Poly Studio
G62 system LLN port.
8
Chapter 3Hardware installation
To Next Page
Loading...
