External amplifiers may have other settings that must be changed. Third-party amplifiers and
speakers should be tuned for proper operation per manufacturer guidelines and audio industry
standards.
If your audio device has an option for fixed or variable audio, choose variable to allow audio output
adjustment from the system controller.
1. Connect the speaker to the 3.5mm output port on the system.
Make sure the 3.5mm connector is fully seated in the connector.
2. In the system web interface, go to Audio/Video > Audio > Line Out.
3. Select Variable.
4. From the Speaker Options drop down menu, choose Line Out.
5. Go to Audio/Video > Audio > General Audio Settings.
6. Verify that Transmission Audio Gain (dB) is set to 0dB.
Connect a USB audio DSP to your Poly Studio G62 system
Connect a supported audio DSP to your system to handle audio input and output.
1. Connect a USB cable from the audio DSP to a USB Type-A connection on the system.
2. In the system web interface, go to Audio / Video > Audio and enable the Enable USB Audio
check box.
The system saves your changes automatically.
Pairing a Poly Trio C60 speakerphone to the system
You can use a Poly Trio C60 speakerphone as a controller and audio device with a Poly Studio G62,
Poly Studio G62 system.
NOTE: You can’t use a Poly Trio C60 speakerphone if your system is connected to Wi-Fi as the
primary network.
In Poly Video mode and Poly Device Mode, you can connect up to four Poly Trio C60 speakerphones
to your system for use as an audio device.
This setup is supported while using the following third-party conferencing applications:
● Microsoft Teams Rooms - Speaker and microphone only. You can connect one Poly Trio C60
speakerphone to your system.
The Microsoft Teams Rooms controller on the Poly Trio C60 speakerphone offers limited
functionality and is not supported as a Teams Rooms controller. Use a connected Poly TC8
and Poly TC10 touch controller or touch screen monitor to control your Microsoft Teams Rooms
environment.
For information on pairing a Poly Trio C60 speakerphone to your system, see the
Poly Video Mode
Administrator Guide
or the
Poly Partner Mode Administrator Guide
at https://www.docs.poly.com.
Connect a USB audio DSP to your Poly Studio G62 system
11
To Next Page
Loading...
