Table 2-3 Components for powering on a Poly Studio G62
Item Description
1 Ethernet connection to the corporate network.
2 PoE+ class 4 power injector.
1. Connect the PoE+ LAN port on the Poly Studio G62 system to the Out port on the PoE+ power
injector.
2. Connect the In port on the PoE+ power injector to a network Ethernet port.
Alternatively, you can connect the Poly Studio G62 system directly to a network Ethernet port
providing PoE+ class 4 power.
Connecting IP peripherals to the Poly Studio G62 LLN port
Connect Poly IP microphones and Poly IP cameras to your Poly Studio G62 system link-local network
(LLN) port.
NOTE: For supported peripherals and configurations, see the
Poly VideoOS Release Notes
.
When connecting IP devices to the Poly Studio G62 system LLN port, observe the following:
● The Poly Studio G62 system LLN port provides a secure connection for audio and video IP
devices such as Poly IP microphones and a Poly Studio E70 camera.
The Poly Studio G62 system LLN port doesn't provide power to connected peripherals.
● To power multiple IP peripherals connected to the Poly Studio G62 system LLN port, use an A/V
Ethernet switch such as a Netgear A/V Line M4250 GSM4210PD.
If you're connecting one IP peripheral, you can use a PoE injector rated for the peripheral you're
connecting.
● The LLN port doesn't provide network access.
Connecting IP peripherals to the Poly Studio G62 LLN port
5
To Next Page
Loading...
