In Poly Video mode and Poly Device Mode
● Poly TC10 or Poly TC8 touch controller
● Poly Bluetooth remote control
● Poly IR remote control
In Teams Rooms mode, Zoom Rooms, mode, Google Meet mode, and other provider modes:
● Poly TC10 or Poly TC8 touch controller
● Poly Bluetooth remote control
● Poly IR remote control
Using Device Mode
Connect your computer to the Poly Studio G62 system USB Type-C and HDMI input ports to use the
Poly Studio G62 connected peripherals from your computer in Device Mode.
NOTE: After connecting your computer to they Poly Studio G62, enter Device Mode to use the
system peripherals from your computer.
Connect an Alt DP capable USB Type-C computer port to the USB Type-C port on the Poly Studio
G62 system to use a single cable for Device Mode or sharing content. Poly Studio G62 Alt DP mode
supports the following cable for Alt DP:
USB Type-C 1.83 m (6 ft.) cable, part number L07087-002
For more information on using Device Mode, see the
Poly Video Mode Administrator Guide
and the
Poly Partner Mode Administrator Guide
at https://www.docs.poly.com.
Updating your Poly Studio G62 system
You have several options to update your system software, depending on your environment.
NOTE: If you provision your system, the software update methods in the system web interface are
unavailable. Configure the software update method using your chosen provisioning method.
1. In the system web interface, go to General Settings > Device Management.
2. Select one of the following options in the Download Update From field:
Software Update Method
Description
Poly Online Support Center A software server hosted by Poly.
By default, your system is set to use the Poly update server for
software updates. You can enable automatic updates or manually
update your system using the system web interface.
To use the Poly update server, make sure that your system
can access swupdate.lens.poly.com. This URL is for system
software access only. You can't access this server from a web
browser.
Using Device Mode 15
To Next Page
Loading...
