Poly Studio G62 - Page 7

Table 2-1 Poly Studio G62 Ports
Item Port Description
1 3.5 mm output Connects speakers to the system.
2 3.5 mm input Connects microphones to the system.
3 USB Type-A ports (3.0) Connects USB cameras or USB audio
DSPs.
4 HDMI input Provides the following options:
● Connects an HDMI content source
or HDMI camera.
● Use the system monitor when
connected to a computer HDMI
port.
Provides content sharing capabilities.
5 USB Type-C port Provides the following options:
● Use the system camera, speaker,
and microphone from a connected
laptop.
● Use the system camera, speaker,
microphone, and monitor using a
DP Alt-mode connection. Requires
a supported DP Alt-mode cable
and a computer with a USB Type-
C port that supports DP Alt-mode.
6 Pinhole reset Factory resets the system.
7 HDMI 2 Connects a secondary monitor.
8 HDMI 1 Connects a primary monitor.
9 LLN port Connects IP peripherals such as a Poly
IP microphone or Poly IP camera.
This port doesn’t provide power. A PoE
switch or PoE injector is required to
power IP peripherals connected to the
LLN port.
10
PoE+ power input Powers the Poly Studio G62 system
using a class 4 PoE+ injector or PoE+
switch.
Provides access to the corporate
network.
11
Security lock Physically secures the system.
Poly Studio G62 system ports 3