Poly TC10 - Using the Poly TC10 in Poly Video Mode; Calling; Placing Calls

Using the Poly TC10 in Poly Video Mode3
Pair the Poly TC10 with a video system and set the Provider to Poly in the system web interface to
control and manage your Poly video system with the
Poly TC10.
NOTE: Poly Video Mode isn't available if the Poly TC10 is in standalone mode.
Calling
There are several ways to initiate calls on the system. You can place a call by entering your contact’s
name or number, choosing a contact in the directory, calling a favorite or recent contact, or joining a
scheduled meeting.
You can place calls using the following methods:
● Call using the dialpad
● Call a contact
● Call a frequently used number
● Call a recent contact
● Call a favorite
● Join a meeting from the calendar
Placing Calls
You can place audio calls, video calls, and call into meetings using the onscreen keyboard.
Use the following dialing formats when placing calls:
● IPv4 address:
192.0.2.0
● Host name:
room.company.com
● SIP address:
user@domain.com
● H.323 or SIP extension:
2555
● Phone number: 9782992285
Place a Call
You can place an audio or video call to a contact.
Using the Poly TC10 in Poly Video Mode 9