Poly TC10 - Control Room Elements Using the Poly TC10; Settings; Video Adjustments; Change the Participant Layout

Control Room Elements Using the Poly TC10
You can control room elements such as electronic shades, smart lighting, monitors, and projectors
using the Extron Room Control App on the
Poly TC10.
The administrator must enable the Environment menu option and configure the room elements using
an Extron processor.
1. Select Environment
.
2. Choose one of the following:
● Lights
- Adjust the lights in the room.
● Shades - Adjust the electronic shades in the room.
● Display - Control monitors and projectors in the room.
Settings
Before or during calls, you can adjust video and audio settings, including adjusting the volume and
changing the video layout.
Video Adjustments
You can manage video and certain user interface settings.
Change the Participant Layout
During a call, you can change from the current layout to another layout better suited for the meeting.
The layout frames include the near site and far site.
If you’re sharing content on a single monitor, content displays in one of the frames.
1. In a call, go to
Layouts.
2. Select one of the following layouts:
● Equal: All participants are the same size.
● Gallery: Participants display at the top of the screen and the speaker displays in the main
frame.
● Fullscreen: The active speaker displays in full screen.
Audio Adjustments
You can control several audio settings on the system.
Mute Your Microphones
To prevent distractions for the speaker and meeting participants, you can mute your microphones.
You can mute your audio in or out of a call.
■
Do one of the following:
● Out of a call, select
Menu > Mute
.
Control Room Elements Using the Poly TC10 17