Poly TC10 - 4 Using the Poly TC10 Touch Controller in Partner Modes; Using the Poly TC10 in Zoom Rooms Controller Mode; Start an Instant Meeting in Zoom Rooms; Start a Scheduled Meeting in Zoom Rooms

Using the Poly TC10 Touch Controller in
Partner Modes
4
When paired to a room system, the Poly controller runs the provider selected in the system web
interface.
In standalone mode, you can launch Zoom Rooms (Controller or Scheduler) and Microsoft Teams
Panel.
Using the Poly TC10 in Zoom Rooms Controller Mode
The Poly TC10 in Controller mode controls the functionality of the Zoom Room (either Studio X-series
or a PC), including any video/audio capabilities.
Start an Instant Meeting in Zoom Rooms
You can start an instant meeting from the Zoom Rooms home screen.
■
On the Home screen, select New Meeting.
Start a Scheduled Meeting in Zoom Rooms
You can start a scheduled meeting in Zoom Rooms using the meeting's calendar card or meeting ID.
■
To start a scheduled meeting in Zoom Rooms, do one of the following:
● Select
Join, enter the Meeting ID, and select Join.
● On the Home screen, select the calendar card, and select Start
.
Call a Contact in Zoom Rooms
You can call people or Zoom Rooms listed in your contacts list.
1. Select
Contacts.
2. Select the contact you want to call.
3. Select Meet.
4. To end the call, select End.
Using the Poly TC10 Touch Controller in Partner Modes 19