Poly VVX 500 - Configuring Your Phone Using the Web Configuration Utility

Chapter 1: Getting Started
15
Configuring Your Phone Using the Web Configuration
Utility
This user guide explains how to update phone settings from your phone, using the phone’s menu
commands. If you wish, you can also update these settings remotely with the Poly Web Configuration
Utility.
The phone’s Web Configuration Utility enables you to view and configure phone behavior from a
computer using any compatible Web browser. The utility provides a browser-friendly view of your
phone’s current settings. Using the utility, you can perform many of the same updates from your
computer that you can perform using your phone’s menu system.
You can access the utility using any compatible Web browser installed on a computer that resides on
the same network as your phone. Before you begin, you’ll need to know the IP address of your phone,
and the user password to log in to the utility.
Web Info: Using the Utility
For detailed information on accessing, navigating, and using the utility, see the Poly Web
Configuration Utility User Guide.
To access the Web Configuration Utility for your phone:
1 Launch a Web browser from a computer on the same network as your phone.
2 In the Address Bar of your Web Browser, enter the IP address of your phone. For example, if your
phone’s IP address is 123.22.3.4, enter this information in the address bar.
3 Press the Enter key.
4 From the Web Configuration Utility login screen, select User, and enter the user password. The
default user password is 123.
5 Click Submit.
The Web Configuration Utility Home screen is displayed.