Polycom G7500 User Manual

System Settings
Topics:
▪ Status Settings Reference
▪ Diagnostic Settings Reference
Two types of system settings are available. Status settings include read-only system information about
connections. Diagnostic settings allow you to perform tests to determine if changes are required to
improve performance.
Status Settings Reference
System status settings provide important information on connections to devices, services, and servers.
Certain settings display a Lock on your system. This indicates that the setting is limited to system
administrators.
▪ In a call: Menu > More > Settings > Status.
▪ Out of a call: Menu > Settings > Status.
Status Settings
Setting Description
Active Alerts Displays the status of any device or service with an
error status. If any alerts exist, an alert displays
next to the system time.
Call Control Displays status of the Auto-Answer Point-to-Point
Video setting.
LAN Properties Displays the connection status of the IP network.
Servers
▪ Displays the Gatekeeper and SIP Registrar Server
status.
▪ Displays the active Global Directory Server, LDAP
Server, or Microsoft Server status.
▪ If enabled, displays the Provisioning Service or the
Calendaring Service status.
Peripheral Devices Lists the connection status of peripheral devices.
Polycom, Inc. 35

Polycom G7500 Specifications

General

Bluetooth	Bluetooth 5.0
Power Supply	100-240V AC, 50/60 Hz
Audio Features	NoiseBlockAI, Acoustic Fence
Content Sharing	Yes, wired and wireless
Camera	Polycom EagleEye IV or EagleEye Cube
Microphone	Integrated beamforming microphone array
Connectivity	HDMI, USB, Bluetooth, Wi-Fi
Video Standards and Protocols	H.264 AVC, H.265
Video Input	HDMI
Video Output	HDMI
Audio Standards	G.711, G.722, G.722.1, G.729
Audio Input	HDMI
Audio Output	HDMI
Network Protocols	IPv4, IPv6
Wireless	Wi-Fi 802.11a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Resolution	3840 x 2160
Display	External display required
Compatibility	Microsoft Teams, Zoom
Video Resolution	Up to 4K
Operating System	Polycom RealPresence