System Flags
Polycom, Inc. 184
ENABLE_EPC When set to YES, enables the Polycom proprietary
People+Content.
When set to NO, disables this feature for all
conferences and participants.
Default value: YES
Possible values: YES/NO
HW/VE Yes
ENABLE_EXTERNAL_DB_ACCES
S
When set to YES, the RealPresence Collaboration
Server connects to an external database application,
to validate the participant’s right to start a new
conference or access a conference.
Default value: NO
Possible values: YES/NO
HW/VE Yes
ENABLE_FLOW_CONTROL_REIN
VITE
Used to enable or disable sending a re-INVITE to
endpoints to adjust their data rate. When set to YES,
re-INVITE is used for endpoints that do not support
flow control in SIP using either the Information or
RTCP feedback mechanisms.
Default value: NO
Possible values: YES/NO
HW/VE Yes
ENABLE_G729 Enabled using the G.729 audio codec.
When set to NO, ensures that the G.729 codec is
disabled, and G.711 is used instead. This is useful in
calls where the audio quality is affected by lower line
rates.
Default value: YES
Possible values: YES/NO
Note: The modified flag setting will affect new calls.
HW/VE Yes
ENABLE_H239 When set to YES, Content is sent through a
separate Content channel. Endpoints that don’t
support H.239 will not be able to receive. This flag is
enabled when sending content as a separate
stream.
When set to NO, the Content channel is closed. In
such a case, H.239 Content is sent through the
video channel (“people” video) enabling endpoints
that do not support H.239 Content sharing to receive
the content in their video channel.
Default value: YES
Possible values: YES/NO
HW/VE Yes
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
