System Flags
Polycom, Inc. 185
ENABLE_H239_ANNEX_T In H.239-enabled MIH cascading, when MGC is on
Level 1, this flag enables sending Content using
Annex T. This flag should be set to the same value
(YES/NO) as the settings of the RealPresence
Collaboration Server flag H263_ANNEX_T.
Possible values: YES/NO
HW/VE Yes
ENABLE_HD_SD_IN_FIXED_MOD
E=YES
When set to YES, enables H.264 Standard Definition
(SD), High Definition (HD), and VSX 8000 (Version
8.0) support in Video Switching conferences.
Possible values: YES/NO
ENABLE_LYNC_RTCP_INTRA When set to YES, RTCP FIR is used for sending
Intra Requests. When set to NO, Intra Requests are
sent using SIP INFO Messages.
Default value: NO
Possible values: YES/NO
HW/VE Yes
ENABLE_MCCF Enables or disables the support of External IVR
Services through the MCCF-IVR package is
enabled. In Ultra Secure Mode and in secured
environments where the External IVR Service
through the MCCF-IVR package is not required and
unused ports should be closed, this flag should be
set to NO.
Default value: YES (in Standard security Mode) or
NO (in Ultra Secure Mode)
Possible values: YES/NO
HW/VE Yes
ENABLE_MULTI_PART_CDR Enables saving more than 1MB of Call Detail Record
(CDR) data on the MCU.
By default, the MCU limits the CDR file size to 1MB.
When a CDR file reaches that size, the MCU saves
the CDR and further call data recording is stopped.
In that case, the additional data is lost.
When enabled, a Part Index is added to the CDR
List. It displays the CDR file sequence in the CDR
file set. The files included in a set have the same
unique Display Name.
Default value: NO (disabled)
Possible values: YES/NO
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
