System Flags
Polycom, Inc. 216
SYSTEM_BROADCAST_VOLUME This value is used when the system flag
FORCE_SYSTEM_BROADCAST_VOLUME is set
to YES.
Determines the default audio level with which the
participants connect and send audio to the
conference.
The volume scale is from 1 to 10, where 1 is the
weakest and 10 is the strongest. The default
connection value is 5.
Each unit change represents an increase or
decrease of 3 dB (decibel).
Range: 1-10
Default value: 5
HW/VE No
SYSTEM_LISTENING_VOLUME This value is used when the system flag
FORCE_SYSTEM_LISTENING_VOLUME is set to
YES.
Determines the default audio level with which the
participants connect and receive audio from the
conference.
The volume scale is from 1 to 10, where 1 is the
weakest and 10 is the strongest. The default value is
5. Each unit change represents an increase or
decrease of 3 dB (decibel).
Default value: 5
Range: 1-10
HW/VE No
TC_BURST_SIZE Regulates the traffic control buffer or max burst size
as a percentage of the participant line rate.
Range: 1-30
HW/VE Yes
TC_LATENCY_SIZE Limits the latency or the number of bytes that can be
present in a queue.
Range: 1-1000 (in milliseconds)
HW/VE Yes
TCP_RETRANSMISSION_TIMEOU
T
The number of seconds the server will wait for a
TCP client to answer a call before closing the
connection.
Default value:5 seconds
HW/VE Yes
TERMINATE_CONF_AFTER_CHAI
R_DROPPED
Indicates that the chairperson has left the
conference.
Note: Enable the flag to play this message.
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
