System Flags
Polycom, Inc. 219
802_1X_SKIP_CERTIFICATE_VALIDATION If the flag value is:
• YES - The retrieved certificate is not validated against the
CA certificate.
• NO - The retrieved certificate is validated against the CA
certificate.
Validation failure raises an Active Alarm and is reported in
the Ethernet Monitoring dialog box.
Default value: YES
Possible values: YES/NO
802_FIPS_MODE When set to YES, the availability of the MD5 Authentication
Protocol is neither displayed as a selectable option nor
supported.
Default value: NO
Default value Ultra Secure Mode: YES
Possible values: YES/NO
Alternative Network Address Translation System Flag
Flag Name Description
ANAT_IP_PROTOCOL When set to YES enables Alternative Network Address
Types (ANAT).
Default value:
• ULTRA SECURE MODE: NO
• STANDARD SECURITY MODE: YES
Range: DISABLED, AUTO, PREFER_IPv4, PREFER_IPv6
Alternative Network Address Type (ANAT)
AS-SIP Content System Flag
Flag Name Description
AS_SIP_CONTENT_TIMER Controls the time that the RealPresence Collaboration
Server waits for endpoints to respond to its SDP Re-invite
that is determined by a timer.
Default value: 10 seconds
Range: 1-60 seconds (values outside this range are rejected
and an error message is displayed).
802.1x Authentication System Flags
Flag Name Description
To Next Page
Loading...
