System Flags
Polycom, Inc. 218
VSW_RATE_TOLERANCE_PEREC
ENT
Determines the percentage of bandwidth that can be
deducted from the required bandwidth to allow
participants to connect to the conference.
For example, a value of 20 will allow a participant to
connect to the conference if the allocated line rate is
up to 20% lower than the conference line rate (or
between 80% to 100% of the required bandwidth).
Default value: 0
Range: 0 - 75
HW Yes
WRONG_NUMBER_DIAL_RETRIE
S
The number of redial attempts for a wrong
destination number or a wrong destination number
time-out.
Default value: 3
Range: 0 - 5
A flag value of 0 means that no redials are
attempted.
HW/VE Yes
802.1x Authentication System Flags
Flag Name Description
802_1X_CERTIFICATE_MODE Determines whether one TLS certificate is retrieved from the
Certificate Repository for all IP services or if multiple
certificates will be retrieved, one for each IP service.
Default value: ONE_CERTIFICATE
Possible values: ONE_CERTIFICATE,
MULTIPLE_CERTIFICATE
802_1X_CRL_MODE If the flag value is:
• ENABLED - Forces CRL checking. The system fails the
connection request if the certificate has been revoked or if
there is no CRL.
• OPTIONAL - The system fails the connection request if the
certificate is revoked but does not fail the connection request
if there is no CRL.
• DISABLED - Does not check the CRL and does not fail the
connection request based on the CRL content.
Default value: DISABLED
Possible values: ENABLED, OPTIONAL, DISABLED
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
