Hardware Monitoring
Polycom, Inc. 310
Viewing the Properties of Hardware Components
Use the Hardware Monitor to view the properties of MCU hardware components. The properties displayed
will depend on the type of component it is. Hardware components properties are grouped as follows:
● MCU Properties
● Card Properties (MPMRx, CNTL/CNTL 4000, RTM IP, RTM ISDN, DSP card, RTM LAN, RTM-IP
4000)
● Supporting Hardware Components Properties (Backplane, FANS, LAN, PWR)
To view the properties of a hardware component:
1 In the RMX Management section, click Hardware Monitor .
2 In the Hardware Monitor, select the component of interest (for example, Slot 0 RMX 4000).
3 Right-click and select Properties.
For more information about the hardware properties displayed, see the hardware guide for the RMX
appliance model you have.
Viewing an MCU or Video Card Event Log
For RealPresence Collaboration Server 2000/4000 models, use the Hardware Monitor to view the MCU or
video card event logs. This procedure does not apply to a RealPresence Collaboration Server 1800.
To view an MCU event log:
1 In the RMX Management section, click Hardware Monitor .
2 In the Hardware Monitor, select the MCU or video card of interest.
3 Right-click and select Properties.
4 Click Event Log to view a log of events that were recorded by the MCU.
To Next Page
Loading...
