Hardware Monitoring
Polycom, Inc. 311
5 The logged events can be saved to a *.xls file by clicking Save Event Log. It is not possible to save
individual or multiple selected events; the entire log file must be saved.
Viewing Active Alarms for an MCU
For RealPresence Collaboration Server 2000/4000 models, use the Hardware Monitor to view the MCU
event log. This procedure does not apply to a RealPresence Collaboration Server 1800.
To view an MCUs active alarms:
1 In the RMX Management section, click Hardware Monitor .
2 In the Hardware Monitor, select the MCU of interest (for example, Slot 0 RMX 4000).
3 Right-click and select Properties.
4 Select the Active Alarms tab to view alarms for the MCU, such as temperatures and main power
sensors.
To Next Page
Loading...
