Polycom SoundPoint IP 450 - Placing Calls on Hold; Using the Polycom Web Configuration Utility

Polycom SoundPoint IP 450 User Guide
8
Using the Polycom Web Configuration Utility
This user guide explains how to update phone settings from your phone, using
your phone’s menu system. If you want, you can update these settings
remotely with the Polycom Web Configuration Utility.
The phone’s Web Configuration Utility enables you to view and configure
phone behavior from a computer using any compatible Web browser. The
utility provides a browser-friendly view of your phone’s current settings.
Using the utility, you can perform the same updates from your computer that
you can perform using your phone’s menu system.
You can access the utility using any compatible Web browser. Before you
begin, you’ll need to know the IP address of your phone, and the user name
and password login credentials of the phone user or the phone administrator.
To access the Web Configuration Utility for your phone:
1 Launch the compatible Web browser from a computer on the same
network as your phone. The supported browsers are:
— Microsoft Internet Explorer (version 7.0 and higher)
— Mozilla Firefox (version 3.0.X and higher)
— Apple Safari (version 5 and higher)
— Google Chrome
2 In the Address Bar of your Web Browser, enter the IP address of your
phone.
The IP address is four sets of numbers separated by periods. For example,
if your phone’s IP address is 123.22.3.4, enter 123.22.3.4 in the address bar.
3 Press the Enter key.
4 From the Web Configuration Utility login screen, select User, and then
enter the User password.
5 Click Submit.
The Web Configuration Utility Home screen is displayed.
For detailed information on accessing, navigating, and using the utility, see the
Polycom Web Configuration Utility User Guide, available from the Technical
Bulletins Support page.
The factory default password for a User is 123