Using the Basic Features of Your Phone
11
To place a call using the handset:
>> Do the following steps in any order:
— Pick up the handset.
— Dial the number using the dial pad.
To place a call using Handsfree Speakerphone mode:
>> Do one of the following:
— With the handset on-hook, press , , or the
New Call soft key to obtain a dial tone.
Dial the number using the dial pad.
— With the handset on-hook, dial the number using the dial pad.
Press , , or the Dial soft key.
To place a call using the headset:
>> Do one of the following:
— With the optional headset connected, press or the
New Call soft key to obtain dial tone.
Press .
Dial the desired number using the dial pad.
Note
You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press the Menu key, and then select Status > Platform > Phone. The IP
address is listed together with other phone information. The maximum URL or IP
address length is 32 characters. For example, 10.3.0.42, sip:jane@polycom.com.
Press the URL soft key and enter the URL or IP address. Use * for “.” and # for “@”.
Then press the Send soft key to complete the call.
Your phone may not support SIP URL or IP address dialing. Contact your system
administrator.
Note
If the Handsfree mode disabled message displays on the screen after you press the
speakerphone key, your system administrator has disabled the speakerphone on
your phone.
To Next Page
Loading...
