Polycom SoundPoint IP 450 User Guide
20
3 Call the second party.
4 When the second party answers, press the More soft key, and then the
Confrnc soft key again to join all parties in the conference.
5 Press Confrnc soft key to add another party to the conference.
The first and second party are put on hold.
6 Call the third party.
7 After the third party answers, press the More soft key, and then the
Confrnc soft key again to join all parties in the conference.
A conference similar to this one will now exist.
Note
If configured for single key-press conferences, all conference participants hear the
dial tone and ringback when the conference host places a call to a new party.
Note
If configured for single key-press conferences, you do not need to press the
Confrnc soft key again.
To Next Page
Loading...
