Using the Advanced Features of Your Phone
69
Changing Where Pages are Played
While you send a page, you can pick up the handset or press Speakerphone
or the Headset key and continue speaking. You can also press the Microphone
Mute key to mute your audio so that the people receiving your page won’t
hear anything. This behavior is similar to a phone call.
An incoming page plays from the speakerphone by default. If you lift the
handset or press the Headset key, you’ll hear a dial tone.
Updating the Default Paging Group
If you don’t select a group to send your pages to, your page will automatically
go to the default paging group, Group 1. If you want, you can change the
default paging group.
To update the default Paging Group:
1 Press , then select Settings > Basic > Preferences >
Paging/PTT Configuration > Group Paging.
2 From the Group Paging Configuration screen, press the Edit soft key.
The default paging group is 1.
3 Enter the number of the new default paging group, then press the Ok soft
key.
Updating Paging Group Subscriptions
By default, you’re subscribed to Paging Groups 1, 24, and 25. This means that
you can send pages to and receive pages sent to these groups. You can change
which groups you are subscribed to. However, you can’t disable your
subscriptions to Paging Groups 24 and 25.
To update your Paging Group subscriptions:
1 Press , then select Settings > Basic > Preferences >
Paging/PTT Configuration > Group Paging.
2 From the Group Paging Configuration screen, use the down arrow key to
locate Groups Subscriptions, then press the Select soft key.
Your system administrator can change your phone’s configuration so that you can
change where the page plays: the speakerphone, headset, or handset.
To Next Page
Loading...
