Polycom SoundPoint IP 650 User Manual

User Guide for the SoundPoint IP 650 Desktop Phone
1 - 4
13 Color Graphic Display Shows the user interface of the phone. For
more infomration, refer to Information Status on
page 1-7.
Associated line icons are described in the
following table.
14 Line/Speed Dial Key Use these keys to activate up to six lines or
speed dials that can be assigned to your
phone.
15 Line Indicators Individual multi-color LEDs display the dynamic
call state and remote user status (busy lamp
field (BLF) and presence). The mapping is:
• Solid green—An active call is in progress.
• Fast flashing green—There is an incoming
(ringing) call.
• Flashing green—The call is held by the
other party.
• Flashing red—The call is on hold.
• Solid red—The line is busy remotely
(shared lines)
16 Hookswitch
Item Description

Polycom SoundPoint IP 650 Specifications

General

Full duplex	Yes
Camera included	No
Frequency range	150 - 7000 Hz
Base station keys	26 + 4
Channels quantity	2 channels
Dimensions (WxDxH)	265 x 150 x 190 mm
Networking features	DHCP/Static IP
Ethernet LAN (RJ-45) ports	2
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Supported data transfer rates	10/100 Mbit/s
Product color	Gray
Volume control	Digital
Voice codecs	G.722
Display resolution	320 x 160 pixels
Display number of colors	Monochrome
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Power requirements	24V DC / 500mA
Safety	UL 60950-1;CE Mark;CAN/CSA-C22.2 No. 60950-1-03;EN 60950-1;IEC 60950-1;AS/NZS 60950-1
Certification	- FCC Part 15 (CFR 47) Class B - ICES-003 Class B - EN55022 Class B - CISPR22 Class B - AS/NZS CISPR 22 Class B - VCCI Class B - EN55024 - EN61000-3-2; EN61000-3-3 - ROHS

Weight and Dimensions

Weight	1260 g
Package weight	2045 g