EasyManuals Logo

Polycom SoundPoint IP 650 User Manual

Polycom SoundPoint IP 650
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
User Guide for the SoundPoint IP 650 Desktop Phone
2 - 26
DND when locked - You will not receive indication of any incoming
calls. Calls will go directly to voice mail (if enabled) and display in
your Missed Calls list when you unlock the phone.
3. Press the Lock soft key.
Your phone is locked.
To unlock your phone:
1. From the idle screen, press the Unlock soft key.
2. From the Unlock the Phone screen, enter your user password, and then
press the Enter soft key.
For information on your user password, including what to do if you forget
it, see About Your User Password on page 2-25.
The phone unlocks.
Calling and Answering from a Locked Phone
From a locked phone, anyone can dial the standard emergency number (for
example, 911), and up to five authorized numbers that an administrator can set
up. You cannot call any other numbers from a locked phone.
If you set up your phone so you can answer incoming calls when it is locked,
you can answer calls by first entering your user password.
To call an authorized number from a locked phone:
>>
Do one of the following:
Note
Enabling DND when locked on shared lines disables ringing only. You will still see
a visual notification of the call and have the option to answer it.
Note
Your phone may be set up so that you can quickly lock your phone by pressing the
Lock soft key from the idle screen. If you do this, however, you cannot choose how
to handle incoming calls. Your phone will use the default setting (Allow ringing when
locked), or the last setting you selected.

Table of Contents

Other manuals for Polycom SoundPoint IP 650

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom SoundPoint IP 650 and is the answer not in the manual?

Polycom SoundPoint IP 650 Specifications

General IconGeneral
Full duplexYes
Camera includedNo
Frequency range150 - 7000 Hz
Base station keys26 + 4
Channels quantity2 channels
Dimensions (WxDxH)265 x 150 x 190 mm
Networking featuresDHCP/Static IP
Ethernet LAN (RJ-45) ports2
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Supported data transfer rates10/100 Mbit/s
Product colorGray
Volume controlDigital
Voice codecsG.722
Display resolution320 x 160 pixels
Display number of colorsMonochrome
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)20 - 85 %
Power requirements24V DC / 500mA
SafetyUL 60950-1;CE Mark;CAN/CSA-C22.2 No. 60950-1-03;EN 60950-1;IEC 60950-1;AS/NZS 60950-1
Certification- FCC Part 15 (CFR 47) Class B - ICES-003 Class B - EN55022 Class B - CISPR22 Class B - AS/NZS CISPR 22 Class B - VCCI Class B - EN55024 - EN61000-3-2; EN61000-3-3 - ROHS
Weight and Dimensions IconWeight and Dimensions
Weight1260 g
Package weight2045 g

Related product manuals