EasyManuals Logo

Polycom SoundPoint IP 650 User Manual

Polycom SoundPoint IP 650
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Using the Advanced Features of Your Phone
3 - 13
2. Press the Record soft key.
3. To start recording, press the Start soft key.
“*R*” appears on the graphic display while the phone records.
If you press the Back soft key, you can access the top-level soft keys (for
example, Hold, EndCall, Trnsfer, and Confrnc). You must navigate back
(using the More and Record soft keys) to again access the Stop and Pause
soft keys.
4. Stop recording in one of the following ways:
Press the Stop soft key.
Hang-up or end the active call.
Recording Conferences
You can record conference calls in the same way as other calls with the
following exceptions:
All parties in a conference call are recorded. If one of the conference parties
presses , they are not recorded.
When all parties in a conference call are put on hold together, recording is
paused. You can place or answer other calls, which will be recorded in the
same file. When the conference call is resumed, recording of the
conference resumes.

Table of Contents

Other manuals for Polycom SoundPoint IP 650

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom SoundPoint IP 650 and is the answer not in the manual?

Polycom SoundPoint IP 650 Specifications

General IconGeneral
Full duplexYes
Camera includedNo
Frequency range150 - 7000 Hz
Base station keys26 + 4
Channels quantity2 channels
Dimensions (WxDxH)265 x 150 x 190 mm
Networking featuresDHCP/Static IP
Ethernet LAN (RJ-45) ports2
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Supported data transfer rates10/100 Mbit/s
Product colorGray
Volume controlDigital
Voice codecsG.722
Display resolution320 x 160 pixels
Display number of colorsMonochrome
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)20 - 85 %
Power requirements24V DC / 500mA
SafetyUL 60950-1;CE Mark;CAN/CSA-C22.2 No. 60950-1-03;EN 60950-1;IEC 60950-1;AS/NZS 60950-1
Certification- FCC Part 15 (CFR 47) Class B - ICES-003 Class B - EN55022 Class B - CISPR22 Class B - AS/NZS CISPR 22 Class B - VCCI Class B - EN55024 - EN61000-3-2; EN61000-3-3 - ROHS
Weight and Dimensions IconWeight and Dimensions
Weight1260 g
Package weight2045 g

Related product manuals