Polycom SoundStation IP 7000 Setup Guide

Setting Up Your Phone
1 - 3
• External Microphone Kit with:
— Two Polycom HDX Microphone Arrays
• Mobile Phone Cable
• Computer Calling Kit with:
— Computer Calling Cable
• Video Kit with:
— Polycom HDX Microphone Cable
Installing Your Phone
This section describes how to install your phone. It includes the following
topics:
• Connecting Network and Power Sources on page 1-3
• Connecting Optional External Microphones on page 1-8
• Connecting Optional Auxiliary Audio Components on page 1-12
• Connecting Optional Video Components on page 1-14
Connecting Network and Power Sources
There are four ways to connect your phone to the network and a power source.
Your system administrator can tell you which of the following methods best
suits your teleconferencing needs:
• Power over Ethernet (PoE)
• AC Power (One Phone)
• AC Power (One Phone, with Multi-Interface Module)
• AC Power (Two Phones, with Multi-Interface Module)
Note
When you connect your phone to a Polycom HDX system, you do not need to
connect your phone to a power source. To set up your phone with a Polycom HDX
system, see Connecting Optional Video Components on page 1-14.

Polycom SoundStation IP 7000 Specifications

General

Frequency range	160 - 22000 Hz
Telephone dynamic range	85 dB
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	1080 g
Dimensions (WxDxH)	394 x 372 x 73 mm